C378
Maximum of 200sq cut and strip processing has been realized. Such thick wires have been processed by hand in the field such as cubicle, elevator, power plants where they handle high voltage electrical power lines. KODERA’S delicate technique and adventurous idea have accomplished a special machine for very large wires in diameter.
AWG#2~200sq
CASTING
Kodera Machine for wire processor cut strip and attached option for multifunction in one machine, you can operation easy setting on LCD touch panel.
Specification
| MODEL | C378 |
| OUTER DIMENSIONS | W1,005mm ×D670mm ×H1,360mm |
| WEIGHT | 590kg |
| POWER SUPPLY | AC100V～AC240V（single phase）50Hz/60Hz |
| POWER CONSUMPTION（100V） | 92W（Rated）560W（Max） |
| AIR SUPPLY | 5Nℓ/min 0.5MPa※1 |
| CUTTING LENGTH | 180mm～99,999mm |
| CUTTING TOLERANCES | ±（ 0.1＋0.0005×L ）mm※2 L : indicates a cutting length. |
| STRIPPING LENGTH FRONT END | 0.1～160mm |
| STRIPPING LENGTH REAR END | 0.1～200mm |
| APPLICABLE WIRES TYPE | Battery cable, W1, W2, VSF, IV, KV, UL ,Teflon , Glass Wire, etc |
| APPLICABLE WIRES SIZE | 200sq～AWG#2（30sq）※2 |
| APPLICABLE WIRES O.D. | Max φ35mm※2 |
| WIRE FEED SPEED | Variable |
| CUTTER MATERIAL | Ultra fine particle alloy |
| DRIVE SUPPLY | Stepping pulse motor / Air cylinder |
※1. Use clean,dry air. ※2.Depending on the wire type.
Photographic & Simple
